 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
Check and
Adjust Beat Ignition Timing.
1. Warm up engine to normal operating temperature. (allow fan to
come on once)
2.
Allow engine to idle (idle speed
1200rpm)
3.
Bridge Service
Connector.
|
|
|
| |
|
|
 |
|
|
|
|
|
|
|
|
|
|
4. Attach Strobe Timing
light and point at Timing Mark viewing hole on clutch
housing.
|
|
|
| |
|
|
 |
|
|
|
|
|
|
|
5.
Check alignment of timing marks.
Red mark (20 degrees BTDC) aligns with pointer
|
|
|
| |
|
|
 |
|
|
|
|
|
|
|
6.
Adjust accordingly by slakening
Distibutor retaining bolt and rotating the Distributor. Retightening
bolt once correct.
|
|
|
| |
|
|
 |
|
|
|
|
|
|
|
7.
Remove service connector bridge
once done.
|
|
|
| |
|
|
|
|
 |